Dahua Alarm Kits & Components

Choose from ready-to-install kits or mix and match individual components to suit any home or commercial project.

If you’d like live guidance on your mobile or PC, schedule a session with our team.

Customer SchedulerPartner Scheduler

Dahua Alarm Kits and Components

Dahua Ready Kits

These are pre-assembled kits for fast ordering. You can use them as-is or add extra items if required.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

Premade Network Cables

Any network cable (premade or standard) can connect your alarm control panel to your internet router for mobile app access.
For WiFi connectivity, select a wireless access point in the next section.

1 13

Standard Network Cables

1 3

Dahua Control Panel & Prepacked Kits

The main control panel can connect to your router via Wi-Fi or via a network cable.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

CustomLink Pre-Configuration Service

We can fully pre-configure the system before dispatch, including app setup.

Dahua Wireless Sirens

Select the sirens you need. A typical alarm system includes one outdoor (external) siren and one indoor (internal) siren.
However, you can choose none, one, or multiple of each — up to a total of 6 sirens.

Dahua Wireless Indoor PIRs

The Dahua alarm control panel (hub) supports up to 150 wireless peripherals, including: 6 sirens, 64 wireless keyfobs, 4 repeaters, 8 keypads, 8 PIR-Cameras

Dahua Wireless Reed Switches

The ARD324-W2 and ARD324-W2(S) include an external input that can be connected to any third-party detector.

For garage doors, use a suitable hardwired Roller Shutter Door Reed Switch below.

Hardwired Reed Switches

1 7

Dahua Wireless Keypads

Dahua Alarm Remote Controls (Keyfobs)

1 3

Dahua Wireless Relay Module & Wall Switch

Both the relay module and the wall switch can be configured for control via the mobile app and the 4-button remote controls.

The relay module is mainly used to integrate with extra low-voltage devices, such as triggering a gate or garage motor via their input terminals. This unit requires a 7–24VDC power supply.

The Wall Switch is designed to integrate with 240V devices such as lights and power points. This unit requires a 100–240VAC power supply. All 240V work must be carried out by a licensed electrician.

DC Power Supplies

1 7

Dahua Other Wireless Alarm Products

To extend the wireless signal, you can add up to four repeaters.
Note: A repeater extends the range between the hub and the repeater, and between the repeater and other devices.
It does not repeat or relay the signal from another repeater.

1 4

Other Kits & Components

If you require a system or combination that is not shown here, please request a quote.

If you’d like live guidance on your mobile or PC, schedule a session with our team.

Customer SchedulerPartner Scheduler