HiLook Alarm Kits & Components

Choose from ready-to-install kits or mix and match individual components to suit any home or commercial project.

If you’d like live guidance on your mobile or PC, schedule a session with our team.

Customer SchedulerPartner Scheduler

HiLook Alarm Kits and Components

HiLook Ready Kits

These are pre-assembled kits for fast ordering. You can use them as-is or add extra items if required.

Note: The HiLook alarm keypad includes a built-in wireless receiver that is compatible with HiLook remote controls (keyfobs). No additional receiver is required when adding HiLook remote controls.

1 5

Premade Network Cables

Any network cable (premade or standard) can connect your alarm control panel to your internet router for mobile app access.
For WiFi connectivity, select a wireless access point in the next section.

1 13

Hikvision Network Cables

Access Points

HiLook Control Panel & Prepacked Kits

The main control panel can connect to your router via Wi-Fi or via a network cable.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

CustomLink Pre-Configuration Service

We can fully pre-configure the system before dispatch, including app setup.

Control Panel Power Supplies & Backup Batteries

1 3

Hardwired Sirens

Select the sirens you need. A typical alarm system includes one outdoor (external) siren and one indoor (internal) siren.
However, you can choose none, one, or multiple of each — up to a total of 6 sirens.

Outputs/Relays

1 3

HiLook Hardwired Indoor PIRs

The HiLook alarm main board supports up to 16 detectors in total, including provision for the external siren’s tamper switch.

1 4

Hikvision Compatible Hardwired Detectors

1 9

Other Compatible Hardwired Reed Switches

1 7

HiLook Keypads & Remote Controls

A total of 4 keypads can be connected to the main board.
Note: The keypad includes a built-in wireless receiver that is compatible with HiLook remote controls (keyfobs). No additional receiver is required when adding HiLook remote controls.

Security Cables

Select the cable type and length required for your installation.

  • Sensors and keypads: Use a 4-core cable.
  • Internal siren: Use Fig. 8 or 4-core cable.
  • External siren: Use 4-core + Fig-8, two 4-core cables, or a single 4-core cable if the tamper is not used (not recommended).

For longer runs in larger residential or commercial installations, 14/0.20 cable is recommended.
For environments with potential electrical noise or interference, use screened cables in the next section.

1 10

Screened Security Cables

1 6

Other Kits & Components

If you require a system or combination that is not shown here, please request a quote.

If you’d like live guidance on your mobile or PC, schedule a session with our team.

Customer SchedulerPartner Scheduler
Button label