K&P Dahua Alarm All Products

Dahua Control Panel & Prepacked Kits

The main control panel can connect to your router via Wi-Fi or via a network cable.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

Dahua Wireless Indoor Motion Detectors

The Dahua alarm control panel, also known as the hub, supports up to 150 wireless peripherals, including 6 sirens, 64 wireless keyfobs, 4 repeaters, 8 keypads and 8 PIR cameras.

Dahua Wireless Door Detectors

The ARD324-W2 and ARD324-W2(S) include an external input that can be connected to any third-party detector.

For garage doors, use a suitable hardwired roller shutter door reed switch from the Detectors link at the top of this page.

Dahua Wireless Sirens

A typical alarm system includes one outdoor siren and one indoor siren.

However, you can choose none, one, or multiple sirens, up to a total of 6 sirens.

Dahua Wireless Keypads & Remotes (Keyfobs)

Keypads and remotes may be used to arm, disarm or control the alarm system without using the mobile app.

1 4

Dahua Wireless Relay Module & Wall Switch

The relay module and wall switch can be controlled from the mobile app or compatible remotes.

The relay module is used for extra low-voltage control, such as triggering a gate or garage motor input. The wall switch is used for suitable 240V loads, such as lights or power points.

All 240V work must be carried out by a licensed electrician.

Dahua Wireless Alarm Repeater

To extend the wireless signal, you can add up to four repeaters.

A repeater extends the range between the hub and the repeater, and between the repeater and other devices.

It does not repeat or relay the signal from another repeater.

CustomLink Pre-Configuration Service

For compatible systems, CustomLink can configure and test supported equipment before dispatch to reduce on-site setup work.

Physical installation, site-dependent adjustments and final testing are completed on site.

Deep Dive Support

Paid remote support for advanced configuration, programming, integration, testing, training and troubleshooting.

Available for CustomLink systems and suitable systems purchased elsewhere.

NEED HELP CHOOSING OR FINDING PRODUCTS?

CustomLink offers a wider range of products and solutions than those listed on our website, including complete installation and customised systems.

If you cannot find what you need or would like help choosing suitable products and systems, please contact us.

Call 1300 122 520 (Monday–Friday, 9am–5pm).

ENQUIRY SUBMITTED SUCCESSFULLY

Thank you for contacting CustomLink.

We have received your enquiry and will respond within 1–2 business days by your preferred contact method.

A confirmation email has been sent to your email address.

CONTACT CUSTOMLINK

Have a question or need help with a product, system or project? Send us your enquiry and we'll respond within 1–2 business days.

    Monday to Friday, 9am–5pm. We will do our best to accommodate your preference.