NESS M1 SECURITY & AUTOMATION

Ness M1 is a highly customisable integrated security and automation system. Product selection and programming can vary depending on the required alarm zones, keypads, outputs, automation logic, mobile app control, voice announcements, access control and future expansion.

Ness M1 setup may involve more detailed planning than a standard alarm system. If you are considering a Ness M1 system, please contact CustomLink before purchasing or view the Ness M1 System Overview.

View Ness M1 System Overview

Ness M1 Control Panel & Prepacked Kits

The Ness M1 control panel is the main part of the integrated security and automation system. It connects compatible detectors, keypads, sirens, outputs, expanders, communication modules and other supported devices.

Prepacked kits can be used as a starting point, but Ness M1 systems are highly customisable and should be planned carefully before purchase.

Ness M1 Enclosures

Ness M1 enclosures and mounting accessories may be used to house or support the main control panel, expanders, power supplies, backup batteries and related modules.

Choose the enclosure or accessory based on the panel type, module requirements, battery size and installation method.

1 6

Power Supplies & Backup Batteries

Power supplies, backup power units and batteries may be used to power panels, sirens, expanders, relays, electric locks and other suitable low-voltage devices.

Check the voltage, current rating, battery size and enclosure requirements before selecting a power supply or battery.

1 6

Ness M1 Internet Module for Mobile App

The Ness M1 Ethernet module is required to enable remote access and control through the M1 Cloud mobile app.

Hardwired Sirens

Hardwired sirens create a loud warning sound when the system is triggered.

A system may use an indoor siren, outdoor siren, or multiple sirens for larger sites or separate areas.

Additional power may be required when using multiple sirens. Check the output capacity, siren current draw, power supply requirements and wiring method.

1 8

Ness M1 Voice-Speakers

Ness M1 voice speakers may be used for voice announcements, warning messages and system status messages, depending on programming and system design.

Speaker location and volume should be considered during planning so voice messages can be heard clearly in the intended areas.

Ness M1 Keypads

Ness M1 keypads may be used for system operation, arming, disarming, status display and user control.

Choose the keypad type based on the required user interface, mounting location, display preference and system design.

1 5

 Explore Hardwired Detectors 

Browse our range of hardwired detectors, including reed switches, indoor and outdoor motion detectors, photoelectric beams and specialised detection devices.

Choose suitable detectors based on your system compatibility and installation requirements.

View Hardwired Detectors

Ness M1 Wireless 1-Way Receiver & Remotes

Ness M1 1-way wireless receiver products in this section are intended to connect directly to the Ness M1 system.

They may be used with compatible Ness 1-way wireless remotes and devices, depending on receiver frequency, device compatibility and system programming.

1 4

Ness M1 Wireless 2-Way Receiver & Remotes

Ness M1 2-way wireless receiver products in this section are intended to connect directly to the Ness M1 system.

They may be used with compatible Ness 2-way wireless remotes and devices, depending on receiver frequency, device compatibility and system programming.

Ness Wireless 1-Way Detectors

Ness 1-way wireless detectors may be used where running cables is difficult or not practical.

These devices require a compatible Ness 1-way wireless receiver. Check the receiver type, frequency, detector compatibility and system design before selecting these products.

1 4

Ness Wireless 2-Way Detectors

Ness 2-way wireless detectors may be used where running cables is difficult or not practical.

These devices require a compatible Ness 2-way wireless receiver. Check the receiver type, frequency, detector compatibility and system design before selecting these products.

1 4

Other Ness 1-Way Wireless Devices

Other Ness 1-way wireless devices in this section may include standalone receivers, wireless input devices or other compatible wireless accessories.

Standalone receivers are not designed to connect directly to the Ness M1 data bus. They may be used for suitable standalone relay or input/output functions, depending on the application and wiring method.

Other Ness 2-Way Wireless Devices

Other Ness 2-way wireless devices in this section may include standalone receivers or other compatible two-way wireless accessories.

Standalone receivers are not designed to connect directly to the Ness M1 data bus. They may be used for suitable standalone relay or input/output functions, depending on the application and wiring method.

Ness M1 Boards

Ness M1 boards and modules may be used to expand the system, add inputs, add outputs, connect wireless devices or support additional system functions.

Choose the board or module based on the control panel, required function, wiring method and system design.

1 6

CustomLink Pre-Configuration Service

For compatible systems, CustomLink can configure and test supported equipment before dispatch to reduce on-site setup work.

Physical installation, site-dependent adjustments and final testing are completed on site.

Deep Dive Support

Paid remote support for advanced configuration, programming, integration, testing, training and troubleshooting.

Available for CustomLink systems and suitable systems purchased elsewhere.

NEED HELP CHOOSING OR FINDING PRODUCTS?

CustomLink offers a wider range of products and solutions than those listed on our website, including complete installation and customised systems.

If you cannot find what you need or would like help choosing suitable products and systems, please contact us.

Call 1300 122 520 (Monday–Friday, 9am–5pm).

ENQUIRY SUBMITTED SUCCESSFULLY

Thank you for contacting CustomLink.

We have received your enquiry and will respond within 1–2 business days by your preferred contact method.

A confirmation email has been sent to your email address.

CONTACT CUSTOMLINK

Have a question or need help with a product, system or project? Send us your enquiry and we'll respond within 1–2 business days.

    Monday to Friday, 9am–5pm. We will do our best to accommodate your preference.