• Set up recording by motion. Most people use this mode to save significant storage space compared to continuous recording. Continuous only and continuous + motion recording can also be set up on request.
• Set up the network address for the NVR and cameras.
• Set up the camera to IR mode for nighttime and white light mode when a human or vehicle is detected (if this feature is available on your camera)
• Enable the siren and flashing light on the camera, if available.
• Enabling a microphone on the camera if this feature is available and you have authorised us to do so
• Temporary PIN codes and passwords, which you must change once the system is installed
• Your mobile app is designed for viewing live content, playback, and receiving notifications. Notifications must be turned on locally on your phone to receive notifications

Any features not specified above are not included. For features not commonly used or more site-specific, such as those listed below, we can assist with the configuration or guide you remotely for an additional support fee. 

• Events include line crossing, intrusion detection, face recognition, vehicle number plate recognition, thermal settings, people counting, etc. All these are site-specific, and the cameras are to be installed in their positions before configuration
• Connection and configuration of site-specific devices, such as your local area network, router, garage doors, gate motors, and lights.

• Sleep/Stay and Away/Full arm modes. A third mode is available on the Ness m1 system.
• Entry delay for the entry and exit path
• Sound of internal and external sirens and flashing of the strobe light in the event of an alarm
• Flashing of the strobe light upon arming and disarming of the system. The sound of sirens can also be configured on request.
• Remote controls
• Temporary PIN codes and passwords, which you must change once the system is installed
• Your mobile app for arming, disarming, triggering outputs for electric doors, gates and lights, and notifications. Notifications must be enabled locally on your phone to receive them.

Any features not specified above are not included. For features not commonly used or more site-specific, such as those listed below, we can assist with the configuration or guide you remotely for an additional support fee. 

• Connection and configuration of site-specific devices, such as your local area network, router, garage doors, gate motors, and lights.
  
• High-level integration between the Clipsal CBUS system and the Ness M1 or the Inception.

• All basic communication functions between the door and room stations, including triggering outputs, which are commonly used for electric strikes, gates and lights
• Temporary PIN codes and passwords, which you must change once the system is installed
• Your mobile app for communicating with the visitors at the door station and triggering outputs, which are commonly used for electric strikes, gates and lights, and notifications. Notifications must be enabled locally on your phone to receive them.

Any features not specified above are not included. For features not commonly used or more site-specific, such as those listed below, we can assist with the configuration or guide you remotely for an additional support fee. 

• Connection and configuration of site-specific devices, such as your local area network, router, garage doors, gate motors, and lights.
  
• Integration with other alarm and CCTV systems.

 

Other systems and integrations not listed above must be quoted on a case-by-case basis to ensure that site-specific requirements are met.

• Inception
• Ness M1
• Hikvision Deep In View Cameras
• Hikvision Deep In Mind NVRs
• Nx Witness and WIsenet Wave VMS
• Gate Automation
• Integration with other systems, including CBUS Lighting