VN Dahua Alarm All Products

Product Menu

Cables

Detectors

Power & Sirens

Networking Products

Dahua CCTV

Dahua Intercom

DAHUA WIRELESS ALARM

Start with a Dahua alarm control panel or prepacked kit, then add compatible detectors, sirens, keypads, remotes, repeaters, pre-configuration and support services as required.

Dahua Control Panel & Prepacked Kits

The main control panel can connect to your router via Wi-Fi or via a network cable.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

Dahua Wireless Indoor Motion Detectors

The Dahua alarm control panel, also known as the hub, supports up to 150 wireless peripherals, including 6 sirens, 64 wireless keyfobs, 4 repeaters, 8 keypads and 8 PIR cameras.

Dahua Wireless Door Detectors

The ARD324-W2 and ARD324-W2(S) include an external input that can be connected to any third-party detector.

For garage doors, use a suitable hardwired roller shutter door reed switch from the Detectors link at the top of this page.

Dahua Wireless Sirens

A typical alarm system includes one outdoor siren and one indoor siren.

However, you can choose none, one, or multiple sirens, up to a total of 6 sirens.

Dahua Wireless Keypads & Remotes (Keyfobs)

Keypads and remotes may be used to arm, disarm or control the alarm system without using the mobile app.

1 4

Dahua Wireless Relay Module & Wall Switch

The relay module and wall switch can be controlled from the mobile app or compatible remotes.

The relay module is used for extra low-voltage control, such as triggering a gate or garage motor input. The wall switch is used for suitable 240V loads, such as lights or power points.

All 240V work must be carried out by a licensed electrician.

Dahua Wireless Alarm Repeater

To extend the wireless signal, you can add up to four repeaters.

A repeater extends the range between the hub and the repeater, and between the repeater and other devices.

It does not repeat or relay the signal from another repeater.

CustomLink Pre-Configuration Service

Prepare your compatible system before dispatch, including supported device configuration, mobile app setup where supported, and testing core functions before shipping.

This service helps reduce on-site setup time and prepares the system for installation and final setup.

Deep Dive Support

For customers who need more detailed remote technical support, such as configuration, system checks, troubleshooting, integration, user training, or support for suitable systems purchased from elsewhere.

This service may apply to many different types of systems, depending on product suitability and support scope.

More Products & Custom Solution Options

CustomLink offers a wider range of products and solutions for full installation and customised systems. However, only commonly used products are listed on our website for simplicity.

If you cannot find the products or solutions you need on this website, please contact CustomLink so we can help recommend suitable options based on your project requirements.

Need help choosing the right products?

Choosing the right system from the beginning is important.

If you are not sure which products to choose, please call 1300 122 520 or submit a Request a Callback, and CustomLink can help guide you before you purchase.

Call 1300 122 520Request a Callback