Ness M1 Advanced Security & Automation Pre-Configured Kit P21-31

Protect selected areas of your property using the 8 indoor movement detectors and flexible alarm arming modes.

Included Functions

• Full Arm (Away) — Arms all configured alarm detectors when everyone leaves.
• Stay Arm — Arms selected detectors while allowing normal movement in other areas.
• Night Arm — Arms selected detectors while occupants are sleeping.
• Automatic Arming & Disarming — Individually enable or disable automatic Full, Stay and Night arming, and authorised automatic disarming under programmed conditions.

Included Configuration

• 1 alarm area.
• Detector selection for Stay Arm and Night Arm agreed during pre-configuration and adjustable after installation.

Included Equipment

• 8 indoor movement detectors.

Use the same 8 indoor movement detectors and connected door sensors to trigger voice announcements through the 3 included speakers.

Included Functions

• Movement Announcements — Announce where movement is detected.
• Door Status Announcements — Announce when a connected door opens or closes.
• Individual Sensor Voice Control — Enable or disable voice announcements for selected detectors.
• Master Sensor Voice Control — Enable or disable all Sensor Voice announcements together.
• Automatic Voice Control — Enable or disable Sensor Voice automatically under programmed conditions.
• Individual Speaker Control — Enable or disable selected speakers.
• Master Speaker Control — Enable or disable all speakers together.

Additional Benefits & Features

• Intruder Deterrence — Voice announcements can warn potential intruders that their presence has been detected.
• Disarmed Operation — Voice announcements can operate even when the alarm is disarmed.
• Queued Announcements — Multiple voice messages are played in the order triggered.

Included Equipment

• Uses the same 8 indoor movement detectors included in the package.
• Uses the garage door sensor included in the package.
• 3 speakers.

Use the same 8 indoor movement detectors to control selected lights automatically or manually.

Included Functions

• Movement-Activated Lighting — Turn on selected lights when movement is detected.
• Automatic Light-Off — Turn off selected lights after a programmed period without movement.
• Lighting Timer Reset — Each new detection restarts the programmed lighting timer.
• Manual Lighting Control — Manually turn selected lights on or off.
• Master Lighting Control — Manually turn all connected lights on or off together.
• Individual Sensor Light Control — Enable or disable Sensor Light functions for selected detectors.
• Master Sensor Light Control — Enable or disable all Sensor Light functions together.

Additional Benefits & Features

• Everyday Convenience — Automatically illuminate selected areas without needing to operate light switches.
• Intruder Deterrence — Automatically illuminate selected areas to draw attention to detected movement.

Included Equipment

• Uses the same 8 indoor movement detectors included in the package.
• 4 relays for controlling up to 4 suitable existing lights or other electrical devices.

Receive spoken reminders at programmed intervals when your garage door has been left open.

Included Functions

• Garage Door Left-Open Reminder — Announce when the garage door remains open beyond a programmed period.
• Repeated Reminders — Repeat announcements at different programmed intervals while the garage door remains open.
• Individual Reminder Control — Enable or disable the garage-door reminder.

Additional Benefits & Features

• Peace of Mind — Know when your garage door has been left open without constantly checking its status.

Included Equipment

• Uses the garage-door sensor included in the package.
• Uses the same 3 speakers included in the package.

Control selected lights automatically through programmed schedules, sunset, sunrise and system events.

Included Functions

• Sunset Sensor Light — Automatically enable selected Sensor Light functions at sunset.
• Bedtime Sensor Light — Enable a different selection of Sensor Light functions at bedtime.
• Sunrise Sensor Light — Automatically disable Sensor Light functions at sunrise by default.
• Scheduled Lighting — Three separate programmable lighting schedules.
• Alarm Lighting — Activate selected connected lights when an alarm is triggered.
• Away Lighting — Turn selected lights on and off at varying times to simulate occupancy while away, stopping when the system is disarmed.

Additional Benefits & Features

• Security & Deterrence — Illuminate selected areas when an alarm is triggered.
• Convenience — Automatically manage lighting according to time and daily routines.
• Simulated Occupancy — Make your property appear occupied while you're away.

Included Equipment

• Uses the same 4 lighting-control relays included in the package.

Monitor and control your existing motorised garage door manually or automatically.

Included Functions

• Manual Garage Door Control — Open or close the garage door using the keypad, mobile app or remote control.
• Automatic Garage Door Closing — Automatically close the garage door after a programmed period if left open, when enabled.
• Arming & Disarming Automation — Automatically operate the garage door under selected programmed arming or authorised disarming conditions.
• Individual Automation Controls — Enable or disable applicable automatic garage-door functions separately.

Additional Benefits & Features

• Convenience — Operate your garage door remotely or through programmed automation.
• Peace of Mind — Check whether your garage door is open or closed.
• Security — Automatically close a garage door left open, subject to suitable safety controls.

Included Equipment

• 1 garage-door contact for monitoring one existing garage door.
• Uses the relay board included in the package for garage-door operation.

Important

Garage-door operation requires a compatible motor, completed installation and suitable safety controls. Automatic closing is enabled only where appropriate safety requirements are satisfied.

Combine multiple functions into one-touch commands or automate actions through programmed schedules and conditions.

Included Functions

Pre-Programmed Favourites

• Sensor Voice Master — Enable or disable all Sensor Voice functions.
• Sensor Light Master — Enable or disable all Sensor Light functions.
• Speaker Master — Enable or disable all 3 speakers together.
• Sunset Sensor Light — Enable selected Sensor Light functions automatically at sunset.
• Bedtime Sensor Light — Enable selected Sensor Light functions at bedtime.
• Scheduled Lighting — 3 separate programmed lighting schedules.
• Alarm Lighting — Enable selected connected lights to respond to alarm activations.
• Away Lighting — Enable simulated occupancy lighting while away.
• Automatic Arming & Disarming — Individually enable or disable automatic Full Arm, Stay Arm, Night Arm and authorised Disarm functions.
• Garage Door Reminder — Enable or disable garage-door left-open reminders.
• Garage Automatic Closing — Enable or disable automatic garage-door closing.
• Garage Arming & Disarming Automation — Enable or disable programmed garage-door operation associated with arming or disarming.
• Leaving Home — One command can arm selected detectors, turn off connected lights, close the compatible garage door and enable selected automation settings.
• Arriving Home — One command can operate the garage door, disarm the alarm area and turn on selected connected lights.

5 Additional Customised Favourites Included

Choose 5 additional Favourites to combine functions or change multiple settings with one command.

Examples include:

• Speaker Favourite — Enable your preferred combination of speakers.
• Sensor Voice Favourite — Enable your preferred combination of Sensor Voice functions.
• Custom Arm Favourite — Activate a customised arming arrangement.
• Everyday Favourite — Restore your normal everyday settings.
• Visitors Favourite — Adjust selected speaker and Sensor Voice settings when entertaining guests.
• Away Favourite — Activate your preferred combination of settings while away.

These are examples only. Your 5 additional Favourites can be selected during pre-configuration from the functions included in this package.

Additional Benefits & Features

• One-Touch Convenience — Activate one Favourite with a single touch. A customised Favourite can be programmed to trigger multiple Favourites.
• Personalised Automation — Choose combinations that suit your daily routines.
• Automatic Operation — Enabled functions operate according to their programmed schedules, detections or conditions.

Operate your security and automation system through the touchscreen keypad, mobile app or remote controls.

Touchscreen Keypad

• 1 Ness M1 touchscreen keypad.
• 6 programmable shortcuts
• Each shortcut can activate a single command or a Favourite that performs multiple commands.
• Each shortcut can display one selected status, such as whether the garage door is open.
• Other programmed controls are accessible through the keypad menus.
• Operates locally without an internet connection.

Mobile App

• Access programmed system controls, Favourites and available status information.
• Remote operation requires internet connectivity.
• Third-party subscription of approximately $30 per year.

Remote Controls

• 2 Ness M1 remote controls included.
• 4 programmable buttons per remote control.
• Buttons can operate individual commands or activate Favourites.

Included Equipment

• 1 Ness M1 touchscreen keypad.
• 2 Ness M1 remote controls.
• 1 Ness M1 Ethernet module for mobile app connectivity.