Trang Chủ

Sản Phẩm

Giải Pháp

Liên Hệ

Thông Tin

Đối Tác

VN Request a Quote Instructions

Hướng Dẫn Yêu Cầu Báo Giá

Quý khách có thể yêu cầu báo giá cho sản phẩm đang được liệt kê trên website CustomLink, sản phẩm chưa được liệt kê trên website, hoặc kết hợp cả hai.

Để gửi yêu cầu báo giá, vui lòng sử dụng form Request a Quote.

Xin lưu ý: cần có ít nhất một sản phẩm được thêm vào quote trước khi form có thể được gửi. Nếu cần, quý khách có thể dùng Custom Quote Item để mở form cho yêu cầu báo giá sản phẩm theo nhu cầu.

Cách Yêu Cầu Báo Giá

1. Sản Phẩm Đang Được Liệt Kê Trên Website

Vào trang sản phẩm phù hợp
Nhấn Add to Quote
Sau khi đã thêm tất cả sản phẩm cần báo giá, mở form Request a Quote và gửi thông tin của quý khách

2. Sản Phẩm Có Trên Website Và Chưa Có Trên Website

Thêm các sản phẩm đã được liệt kê bằng cách nhấn Add to Quote
Trong quote form, nhấn Add Custom Products
Nhập thông tin cho các sản phẩm chưa hiển thị trên website, bao gồm tên sản phẩm, part number và các tính năng chính nếu có thể

3. Sản Phẩm Chưa Được Liệt Kê Trên Website

Thêm Custom Quote Item để mở quote form
Trong quote form, nhấn Add Custom Products
Nhập càng nhiều thông tin càng tốt, bao gồm tên sản phẩm, part number, mô tả và các tính năng liên quan

Lưu Ý Quan Trọng

Vui lòng cung cấp đủ thông tin để CustomLink có thể đánh giá yêu cầu của quý khách đúng cách.

Thông tin chưa đầy đủ hoặc không rõ ràng có thể làm chậm quá trình xử lý hoặc khiến CustomLink không thể chuẩn bị báo giá.

Tất cả báo giá phụ thuộc vào:

Tình trạng hàng có sẵn
Lead times
Xác nhận cuối cùng về thông số kỹ thuật

Custom Quote Item chỉ được dùng để mở yêu cầu báo giá sản phẩm theo nhu cầu thông qua form.

Trang Chủ

Sản Phẩm

Giải Pháp

Liên Hệ

Thông Tin

Đối Tác

Pre-Configuration Service Inclusions

CCTV Systems

Our Pre-Configuration Service prepares and tests your CCTV system before shipping, helping save time and avoid setup errors.

Standard Pre-Configuration Includes

Recording Setup

  • Default: motion-based recording, recommended to save storage
  • Optional: continuous only, or continuous plus motion on request

Network Setup

  • Preparing network addressing for the NVR and cameras
  • Final setup may later adjust addressing to suit the site network environment

Camera Features

  • Enabling IR for night vision
  • Enabling white light or deterrent light when detecting humans or vehicles, where supported
  • Activating the siren or flashing light where applicable
  • Enabling the microphone with your authorisation

Security Access

  • Temporary PIN codes and passwords, to be changed after installation

Mobile App Setup

  • Live viewing
  • Playback
  • Notifications
  • Notifications should still be enabled locally on your device

Not Included in Standard Pre-Configuration

Advanced or site-specific features such as:

  • Line Crossing
  • Intrusion Detection
  • Facial Recognition
  • Number Plate Recognition
  • Thermal Calibration
  • People Counting
  • Integration with routers, garage doors, gates, or lighting systems

These can be completed during final setup or through Paid Deep Dive Remote Support where more involved technical work is required.

Alarm Systems

Our technicians prepare your alarm system to support faster installation and reduce on-site programming time.

Standard Pre-Configuration Includes

Arming Modes

  • Sleep / Stay
  • Away / Full Arm
  • Optional third mode for Ness M1 where applicable

Entry / Exit Settings

  • Configured delays for entry and exit paths

Alarms & Notifications

  • Internal and external sirens
  • Flashing strobe during alarm
  • Strobe and optional siren sounds during arming and disarming

Remote Controls

  • Pre-configured key fobs and handheld remotes

Security Access

  • Temporary PIN codes and passwords are to be changed after installation

Mobile App Setup

  • Arming and disarming
  • Triggering outputs such as doors, gates, or lights
  • Alarm notifications

Not Included in Standard Pre-Configuration

Advanced integrations such as:

  • Network or router connections
  • Integration with garage doors, gates, or automation platforms
  • High-level integrations with Clipsal C-Bus, Ness M1, or Inception

These can be completed during final setup or through Paid Deep Dive Remote Support, where more involved technical work is required.

Intercom Systems

Our technicians prepare your intercom for essential communication and convenience before shipping.

Standard Pre-Configuration Includes

Communication Functions

  • Door-to-room communication
  • Triggering outputs for electric strikes, gates, or lights

Network Setup

  • Preparing network addressing for door and room stations
  • Final setup may later adjust addressing to suit the site network environment

Security Access

  • Temporary PINs and passwords, to be changed after installation

Mobile App Setup

  • Communication with visitors
  • Triggering outputs remotely
  • Notifications for calls and alerts
  • Notifications should still be enabled locally on your device

Not Included in Standard Pre-Configuration

  • Integration with other systems, such as CCTV or alarm
  • Site-specific network or router setup
  • Gate, lighting, or automation linkages

These can be completed during final setup or through Paid Deep Dive Remote Support, where more involved technical work is required.

Systems Quoted Separately

For complex systems or specialised integrations, pre-configuration is available by quotation so site-specific needs can be assessed properly.

Commonly quoted systems include:

  • Inner Range Inception
  • Ness M1
  • Hikvision DeepInView Cameras
  • Hikvision DeepInMind NVRs
  • Nx Witness
  • Wisenet Wave VMS
  • Gate Automation Systems
  • Clipsal C-Bus Lighting and related automation platforms

Request a Quote

For products or systems not listed on our website, please submit a request through our Request a Quote form.

We will confirm lead time, features, and costs based on your specific requirements.

For help using the form, please refer to Request a Quote Instructions.