Product Menu

Cables

Detectors

Power & Sirens

Networking Products

Hikvision CCTV

Hikvision Intercom

HIKVISION WIRELESS ALARM

Start with a Hikvision AX PRO alarm control panel or prepacked kit, then add compatible detectors, sirens, keypads, remotes, repeaters and related accessories as required.

Hikvision Control Panel & Prepacked Kits

The main control panel can connect to your router via Wi-Fi or via a network cable.

Note: The alarm control panel (hub) includes a built-in wireless receiver, so no separate receiver is required. However, if you need to extend the wireless signal, you can add up to four repeaters.

1 3

Hikvision Wireless Indoor Motion Detectors

The Hikvision alarm control panel (hub) supports a total of 96 wireless zones/outputs (including 48 PIRCAMs), 48 wireless keyfobs, 4 repeaters, 6 sounders, 8 tag readers & keypads.

1 7

Hikvision Wireless Door Detectors

The DS-PDMC-WB, DS-PDMCK-WB and DS-PDMCX-E-WB include an external input that can be connected to any third-party wired detector.

For garage doors, use a suitable hardwired roller shutter door reed switch from the Detectors link at the top of this page.

1 4

Hikvision Wireless Outdoor Detectors

Hikvision wireless outdoor detectors may be used for yards, walkways, side access areas, windows, sliding doors and perimeter areas.

Outdoor detection should be selected and positioned carefully to suit the site conditions and help reduce false alarms.

1 4

Hikvision Other Wireless Detectors

Other wireless detectors may be used for specific alarm monitoring needs, such as glass break detection, water leak detection, temperature monitoring or combined detection functions.

Check compatibility with the alarm system and confirm how the detector will be used before selecting these products.

1 4

Hikvision Wireless Sirens

A typical alarm system includes one outdoor siren and one indoor siren.

However, you can choose none, one, or multiple sirens, up to a total of 6 sirens.

Hikvision Wireless Keypads & Remotes (Keyfobs)

Keypads, remotes and the Hik-Connect app may be used to arm, disarm and operate the alarm system.

1 8

Hikvision Wireless Relay Module & Wall Switch

The relay module and wall switch can be controlled from the mobile app or compatible remotes.

The relay module is used for extra low-voltage control, such as triggering a gate or garage motor input. This unit requires a suitable 7–24VDC power supply.

The wall switch is used for suitable 240V loads, such as lights or power points. This unit requires a suitable 100–240VAC power supply.

All 240V work must be carried out by a licensed electrician.

Hikvision Wireless Alarm Repeater

To extend the wireless signal, you can add up to four repeaters.

A repeater extends the range between the hub and the repeater, and between the repeater and other devices.

It does not repeat or relay the signal from another repeater.

Hikvision Other Wireless Alarm Products

Other wireless alarm products may be used to connect suitable hardwired devices to the Hikvision AX PRO wireless alarm system.

For example, the Hikvision single input transmitter is supplied as a PCB only and is intended to convert a suitable hardwired device into a wireless device. It supports two-way wireless communication, tamper protection, low battery reporting, RF supervision and remote configuration through the Hik-Connect app.

CustomLink Pre-Configuration Service

Prepare your compatible system before dispatch, including supported device configuration, mobile app setup where supported, and testing core functions before shipping.

This service helps reduce on-site setup time and prepares the system for installation and final setup.

Deep Dive Support

For customers who need more detailed remote technical support, such as configuration, system checks, troubleshooting, integration, user training, or support for suitable systems purchased from elsewhere.

This service may apply to many different types of systems, depending on product suitability and support scope.

More Products & Custom Solution Options

CustomLink offers a wider range of products and solutions for full installation and customised systems. However, only commonly used products are listed on our website for simplicity.

If you cannot find the products or solutions you need on this website, please contact CustomLink so we can help recommend suitable options based on your project requirements.

Need help choosing the right products?

Choosing the right system from the beginning is important.

If you are not sure which products to choose, please call 1300 122 520 or submit a Request a Callback, and CustomLink can help guide you before you purchase.

Call 1300 122 520Request a Callback